EZ Web Lynx 3.3V

Add monitoring and control capability from any internet-ready mobile device or PC to your products. The module contains an integrated web server to bridge it's 17 I/O pins to any 10BASE-T Ethernet port.



1-25:  $49
26-99:  $30
100-999:  $22
More:  RFQ
Order Securely from CCSinfo.com

Adds monitoring and control capability to your products from any internet-ready mobile device or PC

  • Provides access to data through any 10BASE-T port
  • Serves custom HTML dynamic web pages for displaying data
  • Sends email notifications of event driven alarms and/or daily status

Interfaces to analog and digital sensors, switches, relay drivers, motor drives and controls

  • Any I/O pin can be used for digital I/O. 3.3V devices have 17 I/O pins. 5V devices have 11
  • 6 I/O pins can be used as analog inputs on 3.3V devices; 5 pins on 5V devices. Analog inputs have a range from Vdd to GND and a resolution of (Vdd-GND)/256
  • 2 I/O pins can communicate with Dallas sensors over an I2C bus to monitor temperature in Fahrenheit or Celsius
  • 2 I/O pins can be used to implement a serial communications channel
  • 5V devices also allow one pin to be configured as PWM; one as timer
  • Configurable serial capture buffer allows EZ Web Lynx to automatically capture a specific frame of serial data based on user specified start and stop conditions
  • 256 8-bit volatile and non-volatile registers are provided for data storage

Reduces development time and cost to get your products online

  • Integrated web server bridges device I/O to Ethernet, reducing hardware and software development time
  • Uses custom HTML tags to access and control all device I/O, PWM and timer channels, etc
  • Serial AT command interface allows user to configure and operate the device without the need of a network connection
  • UDP server interface included with EZ Web Lynx to accept AT commands and works with the EZ Web Lynx IDE to configure the device
  • HTTP CGI interface commands can be issued to the EZ Web Lynx using HTTP CGI GET and POST commands

Easily integrated into networks

  • EZ Web Lynx permits full modification of its networking settings, allowing it to be used in a variety of network environments

Device configuration protected from unauthorized modification

  • Device Lock password protects EZ Web Lynx from changing the configuration of the device
  • Pin Lock allows I/O pins to be individually locked in their current state to prevent mode configurations from being modified

General Specifications

Specification 5.0V 3.3V
  Physical
  Dimensions
  Width: 0.7"
  Length: 1.625"
  Height: 1.0"
  Width: 0.75"
  Length: 1.5"
  Height: 0.875"
  Header Size   0.1 in   2.0 mm
  I/O Pins   11 - digital I/O pins total
    9 - have additional
         features:
  • 5 - analog
  • 2 - serial communication
  • 2 - I2C (Dallas DS1631
    Temperature Sensors)
  17 - digital I/O pins total
  10 - have additional
         features:
  • 6 - analog
  • 2 - serial communication
  • 2 - I2C (Dallas DS1631
    Temperature Sensors)
  Programming
  Method
  HTML for custom web content
  Supported
  Network
  Protocols
  HTTP -  View HTML pages/send CGI
  UDP -  Command interface, IP broadcasts
  SMTP -  Email
  TFTP -  Uploading/downloading HTML pages
  ICMP -  (Ping)
  DHCP
  Ethernet
  Port
  10 Mbps Half Duplex (IEEE 802.3)
  Memory for
  HTML Pages
  927 KB   896 KB

Electrical Specifications

Specification 5.0V 3.3V
Minimum Maximum Minimum Maximum
  Supply Voltage   (Vdd)
4.5 V
5.5 V
3.1 V
3.6 V
  Supply Current1
175 mA @ 5.0 V
N/A
150 mA @ 3.3 V
N/A
  Input Low
  Voltage (Digital)


     Pin 1-7, 10, 11
     Pin 8, 9
     Reset2

     Pin 1-6, 8, 9,
     Reset2

     Pin 7, 10-17



GND
GND
GND



0.8 V
0.2·Vdd
0.2 V








GND


GND








0.2·Vdd


0.8 V
  Input High
  Voltage (Digital)


     Pin 1-7, 10, 11
     Pin 8, 9

     Pin 1-6, 8, 9
     Pin 7, 10-17



2.0 V
0.8·Vdd



Vdd
Vdd






1.7 V
0.8·Vdd






Vdd
Vdd
  Output Low
  Voltage (Digital)
GND
0.6 V
GND
0.4 V
  Output High
  Voltage (Digital)
Vdd-0.7 V
Vdd
2.4 V
Vdd
  Pin Current
  Source (Output)


     Pin 1-7
     Pin 8-17
 
25 mA
 



2 mA
25 mA
  Pin Current Sink
  (Input)


     Pin 1-7
     Pin 8-17
 
25 mA
 



2 mA
25 mA

Board Layout

Documentation

Software